This is a simple DIY guitar pick holder, inspired like the ones in concerts; where they place extra picks along the microphone stand boom for easy reach. Well, I don't perform in gigs nor concerts, but I just like how the picks lined up nicely and how easy it is to access them.
![](http://lh6.google.com/emel.me/R_loTHc4c1I/AAAAAAAAAx8/G2f98xbsOhY/s800/vlcsnap-8258302.png)
![](http://lh4.google.com/emel.me/R_loTnc4c3I/AAAAAAAAAyM/EGhjsWYPVto/s800/01%20Materials.jpg)
~ 1 Binder Bar ~ 1 A4 size Foam Board
Tools
~ Steel ruler ~ cutter
~ magic tape ~ 3mm diameter rod
![](http://lh4.google.com/emel.me/R_loTnc4c4I/AAAAAAAAAyU/o84wtOLCbck/s800/02%20Step%2001.jpg)
Cut the foam board to a 3 cm strip
![](http://lh4.google.com/emel.me/R_loTnc4c5I/AAAAAAAAAyc/AhqZnLpMi9I/s800/03%20Step%2002.jpg)
Fold the foam strip into two along its length and tape it to a steel ruler. Fold in way to have one side is slightly wider than the other.
![](http://lh6.google.com/emel.me/R_locHc4c6I/AAAAAAAAAyk/Qe8uQ76Dr74/s800/05%20Step%2003.jpg)
Insert the foam board into the binder bar by sliding it in with the ruler from one side till its fully in.
![](http://lh3.google.com/emel.me/R_lomXc4c7I/AAAAAAAAAys/qKHo_fgpBeI/s800/06%20Step%2004.jpg)
Remove the taping and peel off the ruler.
![](http://lh4.google.com/emel.me/R_lomnc4c9I/AAAAAAAAAy8/8FT8-E76Ngs/s800/08%20Step%2004.jpg)
Trim off the access foam at both end, and there you have it; a concert like guitar pick holder.
Should you need a more detailed step-by-step guide, view my entry at Instructables.com for more info. Hope you find this entry useful and easy enough to follow.
![](http://lh4.google.com/emel.me/R_lomnc4c-I/AAAAAAAAAzE/lo3Y1A0Fmgk/s800/09%20Step%2004.jpg)
4 comments:
woof woof!
:P
wah wah...
bagus nieh... nanti mesti alya suka... buat main2..
daddy dier dah pencen main gitar.. beria dulu menuntut ilmu ngan u kan..
tah ingat lg ke tak tah skang nieh..
miaww
ahahaa.. ingat lagi kot.. :)
Post a Comment